How to install artificial lawn on Vertical garden?
With the growing popularity of artificial turf, it is becoming more common to have Vertical garden walls paved with artificial turf, which is much more difficult than laying artificial turf in football fields or kindergartens. The main difficulty is the time it takes to build and the fixation of the artificial turf on the wall.
At present, the lawn width of large domestic artificial lawn manufacturers is 4 meters, a roll of lawn is 100 meters, but the general wall of the conventional height is 3-4 meters, some even shorter. In this case, the artificial turf needs to be cut into several pieces before the paving is in place, which can take a lot of time.
Secondly, a square of artificial turf weighs about two kilograms, which makes it difficult to glue it firmly to the wall. Although the construction is difficult, there are still many reasons for users to choose artificial turf on the wall, so its advantages are obvious to all.
If artificial lawn is installed on the Vertical wall, first of all tools and materials must be ready, including long ruler, wallpaper knife, artificial lawn special glue, brush, rubber hammer, dragon skeleton, electric drill, nails and so on, one cannot be absent.
Before constructing the artificial turf connection process, it is necessary to clean the bonded wall and keep its surface dry and dry. Then attach the dragon skeleton to the wall by sticking it close to the wall and using a paintbrush to draw small circles where the nails need to be hammered, and drill holes in this position to nail the nails.
Next, all you need to do is cut the artificial turf to the desired size with a box cutter, depending on the height of the wall. Nail the lawn into the keel frame when you're done, and don't forget to brush the corners of the lawn with glue to prevent it from cracking.
It should be noted that the drying time should be controlled in the process of artificial lawn gluing. Generally, the drying time should be controlled within 10-30 minutes after gluing, and the gluing time should be pasted when the gluing pulp reaches 80 or 90 percent dry. During the construction of bonding, it is required to align and stick at one time. Do not move the bonded object after bonding.
After a certain time of curing and testing, the process of artificial lawn wall installation is basically completed. It can be seen that the dragon skeleton as a support is the key link of artificial lawn in wall installation. Only in this way can we ensure that the artificial lawn is more stable.
