Soil determination
Before building a flat, the planting site must be surveyed and measured, and the climate, topography, soil texture, fertility, pH, etc. of the construction area must be grasped.
According to different measurement results, different soils should be improved accordingly. Appropriate application of organic fertilizer or soil improvement requires a good agent (Fulihe A) (Fulihe F) to keep the soil pH between 5.5-7.5, Improve the permeability of the soil and improve the ability of the soil to retain water and fertilizer. Ping bed
Floor finishing is first to clean up and remove the ground, soil layer and weeds. The removal of weeds using chemical agents (DuPont Superstar) is also more effective.
The plowing of the flat bed is also a very important task. Through plowing, rake pressing and other measures, the compacted soil can be turned into a compacted soil with proper tightness due to human and animal trampling, mechanical rolling, irrigation and rainfall. soil. Increase the total porosity and capillary voids, thereby enhancing the water permeability and air permeability of the soil, maintaining the soil temperature, increasing microorganisms and increasing the content of effective nutrients.
After the plowing is completed, the ground shall be leveled in time to be neat and consistent with good drainage.
Installation of sprinkler irrigation system
The sprinkler irrigation system saves water and provides even water supply. It is used to balance the supply of water for the lawn and maintain a good viewing effect. The sprinkler irrigation system should be configured in time after the bed is cleaned and leveled. It should be noted that when excavating the pipeline, the surface layer and other soil are placed separately to ensure that the surface layer remains on the top during backfilling.
