Ready to install your gym turf? Faux grass is easy to install temporarily or permanently. If you plan on moving your gym turf to different locations, feel free to lay it on the floor like a rug.
Glue and Tape-down Gym Turf Installation
Before installation, allow your turf flooring to acclimate to your space for 24 to 48 hours.
Make sure your subfloor is level and clean of debris and dust.
Lay your turf and implement roll sequencing to minimize the repeating turf look.
Apply your double-sided tape or adhesive to sections of your turf roll and press down firmly onto the subfloor.
Apply seam sealer to seams where two edges meet.
Ensure a long-lasting hold by rolling a weighted roller across the completed gym turf floor.
Note: Allow your gym turf flooring 72 hours to dry before initial use.
Interlocking Tile Installation
The best part of gym turf tiles is their interlocking feature!
Begin installation with a clean and level subfloor.
Organize your tile layout with chalk lines from the center of the room. Lay your interlocking tiles along the lines and connect the slots of one tile into the corresponding tab of another tile as you go.
Leave the perimeter of the gym floor open until all turf tiles are installed.
If you plan to have your turf up to a wall or fence, you will need to measure the remaining distance you need to cover with the tiles.
With an exacto knife, peel back the tile and hold it as close to the wall as possible, and cut six inches at a time to remove the excess material. Remember to leave a 1/4 inch gap between the tiles and wall. With weather changes, your tiles will expand and contract, which will mitigate rippling in your gym floors.
For a stronger tile hold, we recommend a double-sided mat tap to keep tiles secure.
Gym Turf Installation Accessories
Turf adhesive: For long-lasting gym flooring, turf glue will help seal the deal.
Seam tape: Keep your gym turf floors in place with turf seam tape. Simply place it on the back of your turf rolls or tiles and place it directly on your subfloor.
