A few steps of roof greening artificial lawn installation
With the development of urban greening trend, people pay more and more attention to the greening construction of living environment. Roof afforestation, whether urban environment afforestation, or residential environment afforestation, has become a domestic trend. Rooftop afforestation already made one of the marks that people breaks away from secular life to pursue gradually. This article will explain in detail the artificial lawn roof greening preparation, line, construction six steps.
The preparatory work of roof green artificial lawn construction
Construction tools preparation: line cutters, circular cutters, joint compressors, manmade grass compressors, etc. Carrying and laying grass: Carrying artificial lawn into the construction site, and spreading out the rolled artificial lawn in the designated site according to the site division.
Site environmental testing: ensure that the temperature of the construction site is kept above 10℃.
Paving direction: artificial lawn paving direction is the same, to ensure that the artificial grass yarn is inverted in the same direction.
Other preparations: confirm the number and color of artificial turf.
Accurate measurement tools, such as theodolite measurement tool and standard ruler, were used to mark the positions of all edges and lines on the site according to the site design drawings, and clearly marked with different color brushes to make the area and site clearly divided.
After the manmade lawn on the roof is mowed, it is glued. Before gluing, ensure that the lawn is dry and the drying degree of artificial lawn is in line with the gluing. The gluing speed should be uniform, and the gluing order should be consistent to avoid the phenomenon of high and low.
Artificial turf bonding: the adhesive tape is bonded to the bottom cloth along the marked lines; After that, the marking line along the artificial lawn line is bonded to the adhesive tape to ensure that it is smooth and firm.
Artificial lawn cutting, splicing: use special tools, such as line cutter or circular cutter to cut the edge of artificial lawn; Cutting size to be consistent, and will cut good artificial lawn splicing, joint interval distance should be less than 2㎜.
Artificial lawn joint bonding: artificial lawn joint out of bonding, lawn joint between the application of adhesive tape bonding.
Artificial lawn compaction: the artificial grass compaction machine is used to compact the lawn stitches, to ensure that the stitches are smooth and firm, tight and tight.
Artificial lawn paving: Artificial lawn paving should ensure that the direction of lawn paving should be the same, and the direction of grass silk should be the same. After the completion of artificial lawn paving, the site should be checked to ensure that the paved lawn site is smooth without off-line or off-grass phenomenon.
